What Would Cause Air Bubbles in Pool Pump Suction Basket? – Basic Pool Knowledge

It’s a good time to dive into the pool and everything seems right except for those aggressive bubbles shooting out of the return jets on the pool walls. A few bubbles in the pump or pool is normal, but lots of bubbles and noisy churning indicate that you could be having a problem. So, what would cause air bubbles in pool pump suction basket? 

What Would Cause Air Bubbles in Pool Pump Suction Basket?

What Would Cause Air Bubbles in Pool Pump Suction Basket
What Would Cause Air Bubbles in Pool Pump Suction Basket

In this post, we’ll discuss what air bubbles in your pool mean, some of the reasons why they’re there and how to deal with the problem.

Air bubbles will commonly occur when you’re opening your pool after a long time. But if the bubbles are too aggressive, that means there’s air being sucked into the line on the suction side of the pump. When you open your pool for the season, you’re putting plenty of things back together in the filter system. Chances are the issue is in the above ground equipment rather than the underground plumbing.

Most Common Reasons for Pool Air Bubbles

Is Your Water Level Correct?

Start by checking for the proper level of the water in relation to the skimmers. Water level that’s too low will result in skimmers sucking in air and sending it to the pump/filtration system. Experts recommend ensuring the water level is halfway to three-quarters up the skimmer. And if you have a fiberglass pool, never drain it as that may damage the pool and void your warranty.

Is Your Strainer Lid on Tight?

Your next step is to check whether the strainer pot lid is closed tight. A lid that’s not snug will suck air through the lid into the pump. Here are a few tips on checking the O-ring under the lid:

  • Turn off the pool pump
  • Take off the lid
  • Confirm that the O-ring is there and that it’s in good condition
  • Make sure the O-ring is sealed
  • Get rid of any debris or grit that could be preventing the lid from getting a secure close.

Is Your Valve/Pump Union on Tight?

Your next step is to check the fitting (union) between the valves and the pool pump. When you’re facing bubble problems, this is the most common culprit. This is where the plumbing is taken apart, so it’s highly likely for missteps. There’s also an O-ring at this union so here are some tips on checking it out:

  • Turn off the pool pump
  • Unscrew the nut over the union
  • Confirm that the O-ring is there and in good condition
  • Make sure the O-ring is well placed
  • Confirm that there’s no debris or grit that’s obstructing the union from closing tightly
Bottom Line

With the tips mentioned above, you now know what would cause air bubbles in pool pump suction basket. If you’ve checked all three things and still have air bubbles, you might be dealing with a bigger problem. If that’s the case, it’s important to call your local pool professionals such as our team here at Ironman Pool Care and we’ll be more than happy to help. 


In-Floor Pool Cleaning Technology

The in-floor pool cleaning system changes how you keep your pool clean. It is automatic with an integrated cleaning system installed during construction of a pool. Just like its name, its built at the bottom of a swimming pool and has a pump combined with pop-up rotating heads that look like water sprinklers. It also has a leaf canister that deals with debris collection while the main pool drain provides large capacity for debris intake.

The heads emerges out of the pool when the cleaning system is activated and sprays water at a high pressure. The water circulates and passes through filters removing all contaminants in your pool and leaves the water crystal clear.

Different Types of Pool Cleaning Systems

In-floor pool cleaning technology does not require much manual labour, but these cleaning systems are costly. Also, if they are not professionally installed, then they will not clean your pool properly. Here are other methods you can use to clean your pool besides this one:

Pressure Side Cleaner

In Floor Pool Cleaning Technology

This cleaning system jets water using a booster pump and all debris is removed as the water passes through its cleaner. Pressure side cleaner has excellent pressure, but its drawback is the difficulty in catch the small pieces of dirt, which are easily removed by the in-floor cleaning system.

Robot Cleaner

Robot cleaners can crawl into a pool easily because the machines are electric-powered. All you need to do is submerge the robot and it will automatically clean the pool. However, it has to be monitored and removed from the pool after completing the task.

Suction Cleaner

The suction cleaner works like a liquid air filter; it sucks in water and cleans it, leaving free of sand and leaves. The power comes from a filtration pump, which must be powerful enough to screen out all leaves and sand. However, this cleaning system can have problems dealing with large debris.

Hand-Held Vacuum

This hand-held vacuum works like you home vacuum cleaner. It has sucking ability and it’s attached a long pole that allows you to reach the bottom of a pool easily. You push it into the pool and it will suck up debris and other dirt.

Why is an In-Floor Cleaning System Better than Others?

A pool in your home is a good investment, but it needs proper hygiene. An advanced pool cleaning system will come in handy and it’s advisable to invest in an in-floor cleaning system for excellent results and comes with the following benefits over the others:

  • It cleans automatically and you do not have to go start it. Unlike the manual cleaning system, an in-floor cleaning system will remember to do its work even in your absence.
  • You do not need to buy any equipment. The in-floor cleaning system is installed during construction and so it’s a one time investment.
  • The process of cleaning your pool with an in-floor system enables the water to circulate, which allows chemical and temperature distribution in the pool.
  • No one can tell you have a cleaning system because they are at the bottom of the pool. The only time you can see them is during cleaning and so they do not bother when swimming.
Bottom Line

In-floor pool cleaning technology changes how you’re able to keep your pool clean. Instead of manually having to clean your pool from debris and algae, you can use an in-floor pool cleaner to automatically clean your pool with a press of a button. This system is built into the bottom of the swimming pool and has pop-up rotating heads much like sprinklers that can the surface.

Best Time of Day to Shock Pool

One of the most critical parts of owning a pool is routine pool maintenance. In addition to getting rid of your pool’s dirt and debris, you must understand its chemistry. Without proper pool maintenance, your pool water may turn to a cloudy or green color resulting from a buildup of algae. This change in color is often an indication that the level of free available chlorine in your pool is too low to sanitize the pool properly. This is why you need to know how to shock your pool and when the best time of day to shock pool is.

What Is Shocking A Pool?

Best TIme of Day to Shock Pool

Shocking a pool is simply increasing the concentration of free available chlorine. You can do this by adding more chlorine to the pool or using a commercial product that works by freeing up chlorine that has already formed compounds with contaminants. Adding more chlorine to your pool will kill bacteria, pollutants and any other unwanted organisms in the water.

Most people wait until they have a cloudy pool or pool algae to shock their pool. However, adding shock to your pool on a regular basis can help you avoid pool water problems.

Once you’ve shocked your pool, it’s important to wait for recommended time – usually about eight hours for shock treatments that are based on chlorine. In the case of non-chlorinated shock treatments, you’ll probably have to wait only about 15 minutes.

Note: Swimming in a pool with a high chlorine concentration is dangerous, so be sure to counter check the amount of free chlorine in your pool to ensure it’s within the recommended range before swimming.

Best Time to Shock Your Pool

The best time of day to shock pool is when the sun is down. So, experts recommend shocking your pool in the evening or at night, to make sure it does its job. Shocking during the day can be ineffective as UV rays from direct sunlight significantly reduce free chlorine levels.

If you really have to shock your pool during the day, Ironman Pool Care recommends using a chlorine stabilizer, which works by prolonging the life of chlorine.

Frequency of Pool ShockingBest TIme of Day to Shock Pool

The frequency of pool shocking depends highly on how much you use your pool. As a general rule of thumb, shocking every two weeks is considered good practice. There’s no harm in doing it every month or so but that’s usually not recommended, especially if people are using your pool daily.

Besides shocking for regular maintenance and upkeep, there are other times when you should consider shocking your pool:

  •    When the water temperature rises above recommended levels
  •    After heavy rains
  •    When the free chlorine goes below recommended levels
  •    When the pool water is used frequently or heavily
  •    During extended periods of hot weather

Bottom Line

Keeping your pool in its best condition may seem like an arduous and time-consuming process, but all you need is regular pool maintenance. Shocking will help you to avoid bigger messes and headaches down the road. When it comes to shocking and when the best time of day to shock pool is, be sure to do it frequently, when the sun has set and ensure the pool is safe for swimming before jumping back in.

Cleaning Pool Tile with Baking Soda

You’ve followed all the guidelines on ensuring that your pool is spotless, but one day, you notice that the tiles are stained along the waterline. It’s a common problem pool owners face, but there are several remedies you can try to get rid of it; one of them being cleaning pool tile with baking soda. This article will go over the culprits of the stains and what you can do to remove them using a home remedy.

Cleaning Pool Tile with Baking Soda

What Exactly Are These Stains and What Can You Do to Remove Them?

Most likely, stains along the waterline are calcium deposits. Unfortunately, these deposits can be difficult to clean. There are several reasons you may start noticing calcium deposits on the tiles along your waterline.

Cleaning Pool Tile with Baking Soda

  • Hard water can leave behind calcium residue over time. If you live in an area with hard water, you’ve probably already noticed calcium buildup on sinks and faucets.
  • The second culprit is heat, which not only causes water to evaporate more, but also raises the temperature of the water.
  • If your pool has high alkalinity, high pH and warmer water due to high temperatures, you can expect calcium scale to begin forming.

Reasons to Remove Scale from Pool Tile

No one would want to swim in a pool that’s dirty. Moreover, calcium scale can do some serious damage to your pool and pool equipment if it’s not taken care of.

If not addressed promptly, calcium deposits can result in:

  • Clogged filters – pool filters are designed to deal with water and pool debris such as leaves, bugs and so on, but they’re not suitable for handling hardened calcium deposits.
  • Plaster damage – calcium deposits can spread to other areas of the pool, potentially to the bottom where they can create pits in the plaster.
  • Eye and skin irritation – swimming in a pool with excess calcium deposits may irritate the eyes and skin.

Calcium deposits and scaling look unappealing, can cause serious and expensive damage, and make pools uncomfortable to swim in. There are plenty of ways to clean your swimming pool tile ranging from using vinegar and pressure washing, to cleaning with a pumice stone and using baking soda. Here’s the process involved in cleaning pool tile with baking soda:

The Cleaning Process

  • Mix a proper ratio of baking soda and water so that it makes a paste.
  • Using a sponge or cloth, spread the paste on the discolored or stained tiles. Alternatively, you can use more water and less baking powder and put the mixture in a spray bottle for much easier application.
  • Use a brush that won’t scratch the tiles, such as a nylon brush to scrub the stained area until the deposits come off.
  • Using some warm water and a sponge or clean cloth, rinse the mixture off of your tiles, and that’s it.

Final Thoughts

The best way to prevent a buildup of calciCleaning pool tile with baking soda also works well if you catch and deal with the problem before the stains become tough and stubborn. um deposits in your pool tiles is to take a proactive approach. Regardless of how tough the stains are, pool experts at Ironman Pool Care provide prompt and quality cleaning services that will get them out in no time.

How to Add Liquid Chlorine to Pool

As long as you have a swimming pool, you’re going to need chlorine to maintain it. That’s because chlorine is the one effective chemical that works against harmful microorganisms, and thus, keeping the pool sanitized. But how do you apply it? Surely, you must have realized that there must be more to it than simply throwing some powdery substance into the pool and hoping it dissipates well enough before your next dive. What quantity do you apply based on your pool size and how do you do it? This article will show you how to add liquid chlorine to pool so that you can ensure your water is clean before the next dive.

How to Add Liquid Chlorine to Pool

All of the questions mentioned above are all valid questions you need answered prior to adding liquid chlorine to your pool.

How to Add Liquid Chlorine in Pool

Before you get to the actual application though, know that some of the easiest chlorine products to apply in your pool are of the liquid chlorine variety. They usually come in measured quantities, so it’s easier to pick the gallon in accordance to your pool size.

Besides, liquid chlorine can easily be connected to your mechanical chlorinators – meaning you may not need to monitor the whole chlorine maintenance process, because it will be done automatically.

Chlorine Application – Frequently Asked Questions

How Should I Apply Chlorine To My Pool?

You can either feed the liquid chlorine through your pool’s mechanical chlorinator, or pour the solution directly into the pool – preferably while the pool’s filter is running.

When Is The Best Time To Apply Chlorine?

The first thing you should take note of, with regards to chlorine application is sunlight. Before any application, make sure there’s no sunlight, which leaves early mornings and evening as the best time to apply chlorine in your pool.

How Much Chlorine Should I Add To My Pool?

That depends on a few things. If you add chlorine to the pool while the filter is running (which is always encouraged), you may get a slightly different concentrate than if the filter isn’t running. The most important factor though is the size of the pool. You’ll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.

What’s the Active Ingredient In Chlorine?

Sodium Hypochlorite

What’s the pH Level?

Between 12.3 and 12.9

What’s The Right Quantity Of Chlorine To Add When Winterizing?

If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.

Next Steps

Liquid chlorine is one of the safest means of sanitizing your swimming pool, without worrying about putting excess (since each gallon contains a measured quantity) in your pool. It’s a non-inflammable liquid, thus extremely safe to use. Keep in mind that you can always attach the liquid chlorine to the mechanical chlorinator of the pool – if you’re worried about how to apply liquid chlorinator to pool manually. You can use it both during bikini season, to keep the pool sanitized, as well as during winterization and openings.

So, are you looking for ways on how to add liquid chlorine to pool? You can either feed the liquid chlorine through your pool’s mechanical chlorinator, or pour the solution directly into the pool. This is preferably done when the sun isn’t out so that you achieve the best results. For additional help or pro tips, consider contacting pool servicing professionals at Iron Man Pool Care. Good luck!

Not Covering Pool for Winter

Do you desire to be informed about the effects of not covering pool for winter? Is so, this write- up will guide you about the various flawless steps to adhere to if you want to keep your pool clean and safe during the winter period. If you want to always have an appealing and safe pool throughout the year, it is appropriate you develop the habit of cleaning it more often and ensuring you balance its water regularly.

However, maintaining a pool using do- it- yourself techniques is not ideal since you will likely skip some crucial steps required to make the entire pool cleaning and maintenance results turn out to be impeccable and appealing. Always consider the services of a qualified firm offering pool cleaning and maintenance solutions if you want your pool to be always clean and safe to be utilized every time.

Not Covering Pool for Winter

– Is it Necessary to Use a Winter Cover on your Pool during the Cold or Winter Period
Many pool owners that have their pools winterized will always consider covering their respective pool during the period of winter. However, if you are among that one percent of those people that desire to close their pool, but not cover it during the entire winter period, here are some tricks you should consider utilizing:

– Keeping your Pool Clean
If trees are surrounding your pool, it is advisable you consider purchasing a pool cover. However, if your pool is located in a desert kind of environment, it is not ideal to vacuum your pool while adhering to the common methods since the pumps and pipes will already have been winterized during the cold period.

– Testing and Balancing the Water Not Covering Pool for Winter
Use an appropriate test strips or test kit to perform several tests on your pool water at least once or twice every month. Performing such a test more often is ideal since winter snow and rain is often absorbed into the pool during winter.
In case you want to add chemicals to your uncovered pool during the period of winter, it is essential you pre-dilute the chemicals by mixing them with water inside a bucket and then pouring around the edge of your pool.

– Keeping the Level of Chlorine up in your Pool
Fill a chlorine floater with tablets and then float them in your pool if you want to adjust the level of chlorine. It is important you fill your floaters as required, and regularly test the water in your pool to be very sure you are having approximately 1.0 ppm, till when the temperatures of water will eventually drop to 60 degrees or below.

– Opening your Pool Early
It is ideal you develop a habit of opening your pool prior to the end of winter period or when the temperatures rise into 60’s. Basically, while the water in the pool is still cold, it is possible to run your pool’s pump and be able to maintain water that is clear.

Bottom Line
Utilize these tricks if you are among those not covering pool for winter in order to experience their effectiveness. Be sure to check your chlorine levels throughout the winter and to test the water.

Most Common Pool Repairs

When you own a swimming pool of any style, knowing the early signs you may need pool repairs, as well as indicators of potential problems, can be a real cost saving consideration. With any type of pool, there are a number of problem areas anyone can learn to check on a regular basis.

Like most things in the home, your pool will provide signs and signals of impending problems in most cases. The key is to recognizing these early indicators and get a pool service and pool repair company involved. Of course, if you have regular pool service and maintenance scheduled the pool technician may notice the problem before you do, giving you the heads up to the potential problem.

Lining Problems

One of the most common structural repairs facing pool owners is tears and rips in the lining. This can occur as the lining ages and becomes less resistant to impact, but it can also occur because of sharp objects in the pool.

When you have children, tears in the lining of pools are more common as kids are more likely to take objects into the pool that may cause damage. Small tears are easiest to fix so early repair is a good way to save on the overall cost.

Pool Pump Motors

Motors are used in the pool to circulate water as well as to heat and supply water. When the motor isn’t working correctly it may be running continually, resulting in higher than anticipated electrical bills.

Another sign of motor problems can be pool water that is cloudy or dirty or not maintained at the correct temperature. Lack of movement of the water through filters is also a sign there may be a significant problem.

Pump motors need regular servicing, just like other types of motors. Repairs can be relatively low cost if just a part needs replacing to more costly if the entire motor has to be taken out and a new motor put in.


It isn’t uncommon in hot summer weather for water to evaporate quickly from a pool, particularly when the mercury is into the 100-degree range. However, leaks can also be a primary cause of a rapid or continual loss of water from the pool. Determining if the issue is a leak, and where that leak is, can be a very complicated procedure unless you know where to look.

The best way to avoid costly pool repair services is to have regular pool maintenance scheduled throughout the year. This will proactivity determine problems and let you discuss any concerns you may have about your pool with experts who really understand pools.

Original Article At:  LSCA Pool Services

5 Household Products To Clean Your Pool

Common Household Products You Can Use To Clean Your Pool

Have you ever wondered if you have to use those expensive chemicals and cleaning supplies found at your local pool store? While some are irreplaceable, there are some chemicals found at your pool store than you can find cheaper when they are packaged for something entirely different.

In fact, there are many different household products available that you use every day that you can use as chemicals and tools for cleaning your pool. These products are readily available at most stores across the country and can be obtained for a fraction of the cost that you normally find them in your local pool store.

Remember to Test

Before you begin, be sure you invest in a reliable testing kit to properly test the chemicals present in your water. While you are free to use these household products to clean your pool, never skimp on the testing kit so you are sure you get an accurate read of what exactly is present in your water.

A Word of Warning

While there are many different kinds of common household products that will work perfect for your pool, always remember to check the labels to see what is actually in what you are buying before you put it in your pool. If you don’t, you could end up damaging your pool’s lining or even the plumbing or you could end up with very poor water quality because of something you put into the water.

While the following products will most definitely work in a pool, they are meant for a traditional chlorine based system only. In some cases, these products may not perform as well as the ones designed specifically for a pool, but if you are on a budget, they do make great alternatives and can help you save a little money on your pool maintenance.

Household Chemicals You Can Use In Your Pool

I know it may be hard to believe, but everything you will find on this list you can easily use in your pool at a fraction of the cost of what you will buy at a pool store.

1. Baking Soda

Baking soda is the same thing as sodium bicarbonate or the more proper sodium hydrogen carbonate that you can find to raise the alkalinity in the pool store. You can add 1.5 pounds of baking soda to 10,000 gallons of water to increase the total alkalinity by 10 ppm. One other thing you should take note of, while you can use baking soda in your pool, you should never use the pool version for cooking or baking.

2. Household Bleach

Household bleach, otherwise known as sodium hypo-chlorite, can be used to shock a pool just like that pool shock you pick up in your pool shop. In fact, if you have hard water issues, it can actually help you reduce the calcium precipitation in the water. Just make sure you use the unscented variety. You can raise the chlorine level in a 10,000 gallon pool by 5 ppm by simply adding one half gallon of bleach to the water.

3. Muriatric Acid

Muriatric acid can be used to lower the alkalinity of your water by as much as 10 ppm in a typical 10,000 gallon pool. This acid is sold in most hardware stores as a cleaner and can be found far cheaper compared to the same thing at a pool store.

4. Borax

Borax, which is found in almost every laundry aisle in grocery stores across the country, can be used to raise the pH levels in your pool if they are too low. Just add one half a cup per 10,000 gallons of water to increase the pH. How much you need to use will depend on how big your pool is and how much you need to raise the pH levels in your pool.


5. Plastic Broom

Are you looking for a better way to get up the dirt and leaves that have accumulated at the bottom of the pool? Instead of trying to vacuum the entire pool, take a plastic broom and sweep the dirt into one area first and then vacuum it away. This makes it much easier to clean the bottom of the pool than just using the vacuum. Just be sure you use a broom with plastic ends that will still work under water.


While some pool chemicals and cleaning supplies are simply irreplaceable, others can be easily substituted for common household products that you use almost every day. Remember to check your labels and be careful while using them so you remain safe while working on your pool. Do you use any household chemicals on your pool? Let me know in the comments below.

Happy Swimming!

Original Article at: Swim University